If you’ve seen our D7000 video, you’ve heard this microphone. Every bit of audio in that video, minus Chase’s opening narration and the music, was captured with the Rode. In fact, we put it to use on nearly every behind the scenes video we make. From the mountains in Telluride to the South China Sea, this mic has withstood it all. Much like the Zacuto Z-Finder that I wrote about in my first post, what I love about the Rode SVM is its simplicity. Before I get into the details, I feel like I should back up a little and explain why it’s needed in the first place……
Built-in camera microphones are crap. They pick up every bump and tap that occurs naturally as you handle the camera. They’re especially bad on DSLR’s where they’ll pick up the sound of the lens’s autofocus motor and image stabilizer you may be using. If you’re using the onboard microphone on your DSLR and you’re wondering why your footage sounds like it’s inside a coffee grinder, look no further than that little Image Stabilization switch on the side of your lens. The bottom line is that, in all of these cases, if you want usable sound, you have to use an external microphone.
Notice I said “usable sound” and not “good sound” or “perfect sound” (the latter two require a dedicated audio tech and separate gear…). That’s because most DSLR’s aren’t really built to capture great audio. But, in many cases, especially for BTS footage, this audio is completely acceptable. Most DSLRs rely on AGC (automatic gain control), which means the camera just goes ahead and sets whatever audio level it feels is appropriate. Some cameras will let you set an audio level manually, but since DSLRs don’t have the kind of real estate to leave room for audio level knobs on the outside of the camera, that manual control is buried under at least a couple of menu screens and thus, in my opinion, is useless. If I can’t adjust that manual setting while I’m shooting, I don’t need it.
All this AGC and lack of immediate audio control isn’t such a bad thing though. Remember at the start of this post when I said the Rode SVM let’s me take my mind off of audio and focus it on shooting creatively? I like that I can’t control the audio when I’m shooting with a DSLR. It’s liberating, and I’ve shot enough with these cameras and this microphone to have a *pretty good* idea as to what it’s gonna sound like when I drop it into Final Cut Pro. The mic is simple and reliable.
Speaking of simple, here’s the rundown of the controls of this beauty. It has a nice big LED on the back of it, right in front of my face, that let’s me know that it’s on. It has a power switch, a -10dB pad switch, and a high pass filter switch, and that’s all I need. And actually, to be honest, I don’t usually take notice of the position of any of the switches other than the power switch. I should mention at this point that, for the most part, we use this microphone to shoot behind the scenes videos which are typically a little rough around the edges (which is our style), and thus the audio isn’t particularly critical. When audio is critical, such as an important interview, a short film or commercial with dialogue, or a voice over type narration, we do one of two things; hire a professional sound person or record it ourselves with high end mics and audio booms, even a Zoom H4n. The Zoom H4n is an amazing gadget, but I’ll talk about that in a future post…
The Rhode SVM is available for $249 from B&H Photo.
NOt much for the kind of sound it give.
He Eric,
Good post, and pretty okay mic. I have it myself, but I do think their are some issues nobody adresses. Any ideas?
– I hear a slight “hummm” in the recording, some sort of buzz. Can’t get it out. I use the Canon t2i with Magic Lantern.
– When I operate the camera or change something on the lens, e.g. zoom or focus, the mic will pick that ‘fondling’ sound up. How do you work around that?
Thanks, and looking forward to any other insights!
P
The solution is to never mount the mic on the camera if at all possible. You’ll get much better sound attaching your Stereo VideoMic to a boom pole or mic stand (if they’re stationary) and placing above the subject.
Thanks for the write up, I have been looking into recording options now that I have a HDSLR. I will definitely keep this one in mind.
When shooting video with the Rode, what audio setting do you use on the D7000?
I have the Zoom H4N so I’ll be waiting for your next post. Thanks for these insights tho. I love the audio on your behind the scenes videos and now I know you dont use some huge audio gear, it gives me more confidence that decent quality audio can come from something so simple as this microphone